Hello everyone, I'm Manish and today I will share about how can you install MacOS Sierra on a PC. MacOS is one of the awesome looking operating systems out there right now.  The only is that, MacOS works only with Apple’s hardware on its MacBook and other Mac products.

Well, One cannot install the MacOS, or buy it. However, there is a way, where Windows users could get the MacOS, without paying a high for the Apple hardware.

Hackintosh is a custom PC build specifically made specifically for running MacOS and is made using hardware from a normal windows PC. I will be installing Apple’s latest MacOS Sierra, for this Hackintosh. The level of difficulty for this guide is expert.

Before you start with Hackintosh, there are few pre-requisites which are necessary to have a successful build and installation. Also, These includes hardware recommendations as well as a few additional things necessary to have.

I will use the software by TonyMacX86 for creating MacOS USB, and the only way you to get this software is by signing up at the website. So better do that first. And Let’s get started.

Hardware recommendation to install MacOS Sierra

  • For the best use of Hackintosh, a few checks in your hardware is necessary. For starters, We strictly recommend getting an Intel CPU, as AMD’s are not well supported with Hackintosh.
  • Make sure you have at least 8GB of RAM for a smooth user experience, Less than 8GB RAM may have some problems. The processor should be Intel Core i3 3220T or higher along with a compatible motherboard with UEFI BIOS works great. Remember, there is no support for the latest 7th Generation Core processors, and the 200 series chipset for now.
  • Fresh SSD is recommended for the build, so if you have a spare lying around, that should be your first choice. A clean 7200RPM HDD with at least 500GB of storage space should do the trick too.
  • I recommend you to get a secondary/ spare HDD for this build, and not the one you’ve used on your Windows or Linux build as you’ll be using the hard drive in a different format, which won’t be compatible with Windows OS or any other OS after that. Also, make sure you back up your data before proceeding with the Hackintosh.
  • You can pair up an AMD or Nvidia GPU with your machine. AMD is supported by default, for an Nvidia GPU, you’ll need to install a driver later from here to run things smoothly.
  • Once your hardware configuration is set, then start with the actual Hackintosh preparation.


Process of preparing for Hackintosh

  • Once you get your hardware in place, the next step will be Creating a Hackintosh Installation drive. For this step, you need a working Mac running MacOS Sierra.
  • Once you’ve found a machine with the latest OS version installed, head on to the app store and search for MacOS Sierra. After getting just download it on the system. Just download it, don’t hit install MacOS Sierra when prompted.
Install MacOs sierra on PC
  • Now as I mentioned earlier, the tools necessary for getting MacOS Sierra possible are available on TonyMacX86 website. Assume you have completed the sign-up procedure, now download UniBeast 7.0.1. or higher for creating the bootable drive, and MultiBeast-which is necessary for the post-installation process without any errors, from the downloads section on your Mac.
  • Well, you will need another thing that is a fast USB 3.0 drive with at least 16GB of storage. And the faster the drive, the faster the installation process of MacOS Sierra.
  • Once you download MacOS Sierra, it’ll appear in Applications. Now it’s time to create the drive. Insert the USB drive into the Mac and search for ‘Disk Utility’.
How to install MacOS Sierra on a PC
  • After opening Disk Utility, see the drive connected to the Mac. Look for your USB drive, and highlight it by clicking on it.
  • Now click the ‘Erase’ button. It will ask you for a name, add whatever you feel like. Next, it’ll prompt you to select a format, Choose OSX Extended (Journaled). For Scheme, choose GUID Partition Map, and click on Erase.

Install MacOS Sierra on a PC using UniBeast

  • Now open UniBeast and then click on Continue, and agree to the terms and conditions.
  • It will automatically detect your formatted USB drive. Once you see your drive, click on it, and click Continue.

    • At the ‘Select OS Installation’ screen, select MacOS Sierra, and click on Continue.
    • Now on Bootloader options, choose UEFI mode.
    • At ‘Graphics Configuration Mode’ select the necessary option according to your hardware and click Continue.
    • Verify the installation options and click Continue. It will ask you to enter the password for the Mac machine. Enter the credentials and then click on Install.
    • UniBeast will now install the MacOS onto the USB drive and create a Bootable USB. Once the installation completes, close the box.
      • Now, drag and drop the MultiBeast, that we downloaded along with UniBeast, onto the USB drive.
    • UEFI Configurations


      UEFI is your motherboard’s operating system which helps it interact with the connected hardware and act accordingly. You need to tweak the UEFI a bit for a smooth installation process of the MacOS Sierra. You can enter the UEFI on the motherboard by clicking the ‘Del’ key or any other key as mentioned when you boot your system.

For ASUS UEFI custom settings, click here.

For Gigabyte UEFI custom settings, click here.

For MSI UEFI custom settings, click here.

  • Load Optimised Defaults
  • Disable VT-d, if enabled
  • Disable CFG-Lock, if enabled
  • Disable Secure Boot Mode, if enabled
  • Set OS Type to Other OS
  • If your system has IO SerialPort, disable it
  • Set XHCI Handoff to Enabled
  • Save and exit

Install MacOS on HDD or SSD

  • Once your system is prepared for installation, turn off your machine, and insert the USB drive, preferably on the USB ports at the back.
  • Now turn on the system, and press the hotkey for booting into a drive. It’s usually F12, F11, F10 or F8. Look for the hotkey when your system boots up. It’ll flash along with the UEFI bios hotkey.
  • Once you are asked to select the drive to boot, click on the USB drive.
  • Now you will be on the boot screen. Here, choose MacOS X from USB.
  • Now you will see be greetings by the MacOS installer. Choose your language.
  • Now for a fresh installation, you’ll need to format your existing drive in order to make it compatible with the OS.
  • In the top menu bar select Utilities, and open Disk Utility.
  • Highlight your target drive for the Sierra installation in the left column.
  • Click Erase button.
  • Add a name for the drive.
  • Choose OS X Extended (Journaled) as the format.
  • Choose GUID Partition Map for Scheme and Click Erase.
  • Close Disk Utility
  • When the installer asks you for a location to install, choose the recently created drive. Now the installation begins.
  • Once the installation completes, the system will automatically reboot.

First time setup and MultiBeast

  • Hurray! You’ve almost installed MacOS Sierra. Complete the first-boot process, by adding your Apple ID, setting time and date, keyboard choice etc.
  • Next, we’ll add support for your existing hardware using MultiBeast. Open MultiBeast from the USB.
How to install MacOS Sierra on a PC
  • Click on Quick Start, It will show you a bunch of audio and network hardware options. Select the appropriate hardware depending on your system.
  • Click on Customise, and add GPU drivers. Now, Select the necessary GPU drivers.
  • When you are done, click Save. After saving, click on Build from the options on the top, and click on Install.
  • After completion of installation, reboot the system and voila, your Hackintosh is ready to roll.

Well, Hackintosh used to be a hardest task, but with a new MacOS being unveiled every year, the process keeps on getting less hard and much more convenient. Also, developers such as TonymacX86 have really simplified the process, by giving us great tools, and making it a really cool weekend project for PC enthusiasts as well as Mac aficionados.

Hope, you'll liked it. If you people have any queries regarding anything do comment and let me know about it, I will respond as soon as possible.